Huawei Quidway S2000 Series Command Manual page 74

Command Manual - Port
Quidway S2000 Series Ethernet Switches
interface_name
interface_name=interface_type interface_num. interface_type is the port type and
interface_num is the port number.
Description
Using port mirror command, you can configure the mirror port. Using undo port
mirror command, you can cancel the mirror port.
Note that the mirror port cannot be configured until the monitor port configuration is
done. Moreover, the monitor port cannot be canceled, when there is corresponding
mirror port.
For the related commands, see monitor-port, display mirror.
Example
# Configure Ethernet0/1 as mirror port.
[Quidway] port mirror ethernet0/1
3.1.4 port mirror observing-port
Syntax
port mirror interface_list1 observing-port { interface_type interface_ num |
interface_name }
undo port mirror interface_list1 observing-port { interface_type interface_ num |
interface_name }
View
System view
Parameter
interface_list1: Specified mirror port list. interface_list1 = { interface_type
interface_num
interface_name } ].
interface_name: Specified monitor port name, represented with interface_name=
interface_type interface_num. interface_type is port type and interface_num is port
number.
Description
Using port mirror observing-port command, you can configure monitor port and
mirror port. Using undo port mirror observing-port command, you can cancel the
monitor port and mirror port.
This command equals to running two commands of monitor-port and port mirror.
When mirror port is set, the monitor port is specified simultaneously. The specified
Chapter 3 Ethernet Port Mirror Configuration Commands
specifies the port
| interface_name }
3-3
name and it
[ to { interface_type
is expressed as
interface_num |