Local-Server; Primary Accounting - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches

2.2.7 local-server

Syntax
local-server nas-ip ip-address key password
undo local-server nas-ip ip-address
View
System view
Parameter
nas-ip ip-address: set IP address of access server. ip-address is expressed in the
format of dotted decimal.
key password: Set password of logon user. password is a character string containing
up to 16 characters.
Description
Using local-server command, you can configure the parameters of local RADIUS
server. Using undo local-server command, you can cancel a local RADIUS server.
RADIUS service, which adopts authentication/authorization/accounting servers to
manage users, is widely used in Huawei Quidway series switches. Besides, local
authentication/authorization/accounting service is also used in these products and it is
called local RADIUS function, i.e. realize basic RADIUS function on the switch. Note
that when using local RADIUS server function of Huawei, remember the number of
UDP port used for authentication is 1645 and that for accounting is 1646.
Quidway series switches support up to 16 local RADIUS server groups.
For the related commands, see radius scheme, state.
Example
# Set the IP address of local RADIUS server group to 10.110.1.2 and the password to
huawei.
[Quidway] local-server nas-ip 10.110.1.2 key huawei

2.2.8 primary accounting

Syntax
primary accounting ip-address [ port-number ]
undo primary accounting
View
RADIUS server group view
Chapter 2 AAA Configuration Commands
2-21