Retry Realtime-Accounting - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
Parameter
retry-times: Specifies the maximum times of retransmission, ranging from 1 to 20. By
default, the value is 3.
Description
Using retry command, you can configure retransmission times of RADIUS request
packet. Using undo retry command, you can restore the retransmission times to
default value.
Because RADIUS protocol uses UDP packets to carry the data, its communication
process is not reliable. If the RADIUS server has not responded NAS until timeout, NAS
has to retransmit RADIUS request packet. If it transmits more than the specified
retry-times, NAS considers the communication with the primary and secondary
RADIUS servers has been disconnected.
Setting a suitable retry-time according to the network situation can speed up the
system response.
For the related command, see radius scheme
Example
# Set to retransmit the RADIUS request packet no more than 5 times via the server
huawei in the RADIUS server group.
[Quidway-radius-huawei] retry 5

2.2.13 retry realtime-accounting

Syntax
retry realtime-accounting retry-times
undo retry realtime-accounting
View
RADIUS server group view
Parameter
retry-times: Specifies the maximum times of real-time accounting request failing to be
responded, ranging from 1 to 255. By default, the accounting request can fail to be
responded up to 5 times.
Description
Using retry realtime-accounting command, you can configure the maximum times of
real-time accounting request failing to be responded. Using undo
Chapter 2 AAA Configuration Commands
2-26
retry