Header - Huawei Quidway S2000 Series Command Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches
Description
Using free user-interface command, you can reset a specified user interface. The
user interface will be disconnected after the command is executed.
Note that the current user interface cannot be cleared.
Example
# Reset user interface 1 after logged in to the Ethernet switch via user interface 0.
<Quidway> free user-interface 1
After the command is executed, user interface 1 will be disconnected. It will not be
connected to the Ethernet switch until you log in via the user interface 1 for the next
time.

1.1.10 header

Syntax
header [ shell | incoming | login ] text
undo header [ shell | incoming | login ]
View
System view
Parameter
login: Configures to display login information.
shell: Configures to display the header of setting up a session for the user.
incoming: Configures to display the login header.
text: Specifies the header content.
Description
Using header command, you can configure to display header when user login. Using
undo header command, you can configure not to display the header.
When the users log in the Ethernet switch, if a connection is activated, the login
header will be displayed. After the user successfully logs in the switch, the shell
header will be displayed.
The first English character in the text is regarded as the start and stop characters.
After the stop character is input, the system will exit interactive process automatically.
If you do not want to enter the interactive process, input the text with same English
characters at the beginning and end of the text and press <Enter> directly.
Chapter 1 Logging in Ethernet Switch Commands
1-8