Language-Mode - Huawei Quidway S2000 Series Command Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches
View
User interface view
Parameter
minutes: Specifies the minute, ranging from 0 to 35791.
seconds: Specifies the second, ranging from 0 to 59.
Description
Using idle-timeout command, you can configure the timeout function. If there is no
user operation performed before idle-timeout expires, the user interface will be
disconnected. Using undo idle-timeout command, you can restore the default
idle-timeout.
idle-timeout 0 means disabling idle-timeout.
By default, idle-timeout is set to 10 minutes.
Example
# Configure the timeout value to 1 minute on the AUX user interface.
[Quidway-ui-aux0] idle-timeout 1 0

1.1.13 language-mode

Syntax
language-mode { chinese | english }
View
User view
Parameter
chinese: Configures the language environment of command line interface as Chinese.
english: Configures the language environment of command line interface as English.
Description
Using language-mode command, you can switch between different language
environments of command line interface for convenience of different users.
By default, the value is English.
Example
# Switch from English mode to Chinese mode.
<Quidway> language-mode chinese
Chapter 1 Logging in Ethernet Switch Commands
1-10