Command Manual - Security
Quidway S2000 Series Ethernet Switches
Chapter 2 AAA Configuration Commands
2.1 AAA Configuration Commands
2.1.1 access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the current
ISP domain, ranging from 1 to 512.
Description
Using access-limit command, you can configure a limit to the amount of supplicants in
the current ISP domain. Using undo access-limit command, you can restore the limit
to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP domain.
The supplicants may contend with each other for the network resources. So setting a
suitable limit to the amount will guarantee the reliable performance for the existing
supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain, huawei163.net.
[Quidway-isp-huawei163.net] access-limit enable 500
2.1.2 attribute
Syntax
attribute { ip ip-address | mac mac-address | idle-cut second | access-limit
max-user-number | vlan vlanid | location { nas-ip ip-address port portnum | port
portnum }
Chapter 2 AAA Configuration Commands
2-1