State - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
View
Local user view
Parameter
telnet: Specifies user type as Telnet.
level level: Specifies the level of Telnet users. The argument level is an integer in the
range of 0 to 3 and defaults to 1.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
Description
Using service-type command, you can configure a service type for a particular user.
Using undo service-type command, you can cancel the specified service type for the
user.
Example
# Set to provide the lan-access service for the user huawei1.
[Quidway-luser-huawei1] service-type lan-access

2.1.14 state

Syntax
state { active | block }
View
ISP domain view
Local user view
Parameter
active: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in active state, that is, the system allows the users in the domain (ISP
domain view) or the current user (local user view) to request network service.
block: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in block state, that is, the system does not allow the users in the domain
(ISP domain view) or the current user (local user view) to request network service.
Chapter 2 AAA Configuration Commands
2-13