Idle-Cut - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
Description
Using domain command, you can configure an ISP domain or enter the view of an
existing ISP domain. Using undo domain command, you can cancel a specified ISP
domain.
By default, a domain named "system" has been created in the system. The attributes of
"system" are all default values.
ISP domain is a group of users belonging to the same ISP. Generally, for a username in
the userid@isp-name format, taking gw20010608@huawei163.net as an example, the
isp-name (i.e.huawei163.net) following the @ is the ISP domain name. When Huawei
Quidway Series Ethernet Switches control user access, as for an ISP user whose
username is in userid@isp-name format, the system will take userid part as username
for identification and take isp-name part as domain name.
The purpose of introducing ISP domain settings is to support the application
environment with several ISP domains. In this case, an access device may have
supplicants from different ISP domains. Because the attributes of ISP users, such as
username and password structures, service types, may be different, it is necessary to
separate them by setting ISP domains. In ISP domain view, you can configure a
complete set of exclusive ISP domain attributes for each ISP domain, which includes
AAA schemes ( RADIUS server group applied and so forth.)
For a switch, each supplicant belongs to an ISP domain. The system supports to
configure up to 16 ISP domains. If a user has not reported its ISP domain name, the
system will put it into the default domain.
When this command is used, if the specified ISP domain does not exist, the system will
create a new ISP domain. All the ISP domains are in the active state when they are
created.
For the related commands, see access-limit, radius scheme, state, display domain.
Example
# Create a new ISP domain, huawei163.net, and enters its view.
[Quidway] domain huawei163.net
New Domain added.
[Quidway-isp-huawei163.net]

2.1.8 idle-cut

Syntax
idle-cut { disable | enable minute flow }
View
ISP domain view
Chapter 2 AAA Configuration Commands
2-8