Local-User - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Example
# Set the connection timeout to 36 minutes.
[Quidway] ftp timeout 36

1.3.5 local-user

Syntax
local-user user-name
undo local-user { user-name | all [ service-type { telnet | ftp | lan-access } ] }
View
System view
Parameter
user-name: Specifies a local username with a character string not exceeding 32
characters, excluding "/", ":", "*", "?", "<" and ">". The @ character can only be used
once in one username. The pure username (the part before @, namely the user ID)
cannot exceed 24 characters.
service-type: Specifies the service type. telnet means that: the specified user type is
telnet. ftp means that: the specified user type is ftp. lan-access means that the
specified user type is lan-access which mainly refers to Ethernet accessing users,
802.1x supplicants for example.
all: All the users.
Description
Using local-user command, you can configure a local user and enter the local user
view. Using undo local-user command, you can cancel a specified local user.
By default, no local user.
For the related commands, see display local-user, server-type.
Example
# Add a local user named huawei1.
[Quidway] local-user huawei1
[Quidway-user-huawei1]
Chapter 1 File System Management Commands
1-18