Huawei Quidway S2000 Series Command Manual page 40

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches
# There are no corresponding routes in the natural mask range (only displaying the
longest matched route). Display the detailed information.
<Quidway> display ip routing-table 169.253.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Summary count:1
**Destination: 169.0.0.0
Protocol: #Static
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47
Table 2-5 Description of information generated by the command display ip routing-table ip_address
Field
Destination
Mask
Proto
Preference
Nexthop
Interface
Vlinkindex
Mask: 255.0.0.0
Preference: -60
Cost: 0/0
Destination address
Mask
Routing protocol
Routing preference
Next hop address
Output interface, through which the data packet destined for the destination network segment
is sent
Virtual link index
2-7
Chapter 2 System IP Configuration Commands
* = Next hop in use
Description