ZH
4. Install a universal clutch alignment tool (1).
5. Align the clutch disc to the flywheel.
Note: Gradually tighten the clutch cover bolts 1 to
1 1/2 turns at a time.
6. Tighten the clutch cover bolts (1) until all bolts are
fully seated. Tighten the bolts to 25 N·m (18 ft.
lbs.).
7. Remove the clutch alignment tool (1).
8. Install the transmission (Refer to 21 - TRANSMIS-
SION/TRANSAXLE/MANUAL - INSTALLATION).
CLUTCH 6 - 11