Chrysler 2005 Crossfire SRT6 Service Manual page 639

ZH
2. Rotate the belt tensioner counterclockwise and
install the accessory drive belt over the tensioner
pulley.
3. Release the belt tensioner and remove the wrench.
4. Install the engine cover (1). Align the engine cover
retaining clips to the rubber mounts, and push
down firmly to connect engine cover to rubber
mounts.
Note: To ease the installation of the engine cover,
apply a small amount of lubricant to the engine
cover rubber mounts.
5. Start the engine and verify the accessory drive belt
is properly routed and seated.
ACCESSORY DRIVE 7 - 95