Chrysler 2005 Crossfire SRT6 Service Manual page 634

7 - 90 ACCESSORY DRIVE
4. Install the air pump tube assembly (1) to the
engine. (Refer to 25 - EMISSIONS CONTROL/AIR
INJECTION/AIR PUMP
INSTALLATION).
5. Install the engine cover (1). Align the engine cover
retaining clips to the rubber mounts, and push
down firmly to connect engine cover to rubber
mounts.
Note: To ease the installation of the engine cover,
apply a small amount of lubricant to the engine
cover rubber mounts.
6. Start the engine and verify the accessory drive belt
is properly routed and seated.
INLET TUBE -
ZH