Chrysler 2005 Crossfire SRT6 Service Manual page 630

7 - 86 ACCESSORY DRIVE
2. Remove the air pump tube assembly retaining bolts
(2).
3. Disconnect the air pump tube assembly (1) from
the switchover valves.
4. Remove the air pump tube assembly (1) from the
engine.
5. Release the tension on the accessory drive belt by
attaching a wrench and pulling up on the tensioner
and relocating the accessory drive belt.
6. Remove the accessory drive belt tensioner pulley
by holding the stud with a wrench and removing
the nut.
ZH