Chrysler 2005 Crossfire SRT6 Service Manual page 665

ZH
*NO SOUND FROM RIGHT DOOR SPEAKERS (CONTINUED)
AMPLIFIED RIGHT DOOR SPEAKER (+) CIRCUIT OPEN
AMPLIFIED RIGHT DOOR SPEAKER (-) CIRCUIT OPEN
POWER AMPLIFIER
For a complete Audio System Circuit Diagram, (Refer to 8 - ELECTRICAL/AUDIO - SCHEMATICS AND DIA-
GRAMS).
Diagnostic Test
1.
MEASURE RIGHT DOOR SPEAKER CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Power Amplifier harness connector.
Note: Check connectors - Clean/repair as necessary.
Disconnect the Right Door Speaker harness connector.
Note: Check connectors - Clean/repair as necessary.
Connect a jumper wire between cavity 1 and cavity 2 of inline harness
connector C231.
Measure the resistance between cavity 7 (connector B) and cavity 17
(connector B) of the Power Amplifier harness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Power Amplifier. (Refer to 8 - ELECTRICAL/
AUDIO/AMPLIFIER - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Amplified Right Door Speaker (+) or (-) circuit
for an open.
Perform BODY VERIFICATION TEST.
AUDIO - ELECTRICAL DIAGNOSTICS 8A - 11
POSSIBLE CAUSES