Table of Contents
Advertisement
04-22
4. SELF-DIAGNOSIS CHECK
▶
How to enter self-diagnosis mode
1.
Turn the ignition ON with the TRIP switch pressed.
2.
Press and hold the TRIP switch for 5 to 10 sec. with the ignition ON.
3.
Press and hold the TRIP switch for less than 10 sec. and then cycle the switch between ON
and OFF 5 times within 3 sec.
4.
Confirm that the self-diagnosis mode is activated through the instrument cluster.
▶
Self-diagnosis OFF
If the engine speed increases to 396 rpm or more while the engine is cranking or the ignition key
is turned OFF in self-diagnosis mode, the self-diagnosis mode is turned OFF automatically.
▶
Operating process
1.
Speed gauge: changes from 0 to 220 km
2.
RPM gauge: changes from 0 to 6,000 rpm
3.
Fuel gauge: changes from E to F
4.
Temperature gauge: changes from C to H
5.
Warning/Indicator lamps: All indicator/warning lamps controlled by MICOM are turned ON.
6.
Dimming: Illuminates at the highest lighting level.
7.
LCD display: All elements are activated.
Advertisement
Table of Contents
Troubleshooting
