Installing The Intrusion Switch Cable - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

17.1.3 Installing the intrusion switch cable

I
The rubber bumper is only necessary in case of rack model
configuration.
Figure 349: Attaching a rubber bumper to the front intrusion switch
I
In case of rack model configurations, a rubber bumper needs to be
attached to the front intrusion switch as described below. When working
on a floorstand model, please skip this step.
Ê Attach a rubber bumper (C26192-Y26-C43) to the front intrusion switch as
shown.
TX2550 M4 Upgrade and Maintenance Manual
Cabling
485