Installing The Intrusion Switch Cable - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

16.3.3 Installing the intrusion switch cable

Figure 606: Attaching a rubber bumper to the front intrusion switch
I
In case of rack server configurations, a rubber bumper needs to be
attached to the front intrusion switch as described below. When working
on a tower server, please skip this step.
Ê Attach a rubber bumper (C26192-Y26-C43) to the front intrusion switch as
shown.
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Cabling
765