Converting A Tower Model To A Rack Model; Preliminary Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

15 Converting a tower model to a
rack model
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Safety notes
For further information, please refer to chapter
page 35.
15.1

Preliminary steps

"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
Ê Remove all external cables.
"Getting access to the component" on page 51
Ê
front cover" on page 61
I
The front cover is no longer required.
"Removing the anti-tilt bracket" on page 77
Ê
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Hardware: 20 minutes
"Important information" on
including "Removing the
389