Installing The 4X 3.5-Inch Hdd Extension Box; Preliminary Steps; Removing Accessible Drive Dummy Covers; Installing The Ultraslim Odd Into The Hdd Extension Box - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

7.5.5

Installing the 4x 3.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
7.5.5.1

Preliminary steps

"Suspending BitLocker functionality" on page 105
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
Ê Remove the fan bridge, see section
7.5.5.2

Removing accessible drive dummy covers

Ê Remove accessible drive filler covers from the required bays, see section
"Accessible drive filler covers" on page
Ê Remove the accessible drive covers, see section
on page 100.
7.5.5.3

Installing the ultraslim ODD into the HDD extension box

Ê If applicable, install the ultraslim ODD into the new 4x 3.5-inch HDD
extension box, see section
7.5.5.4

Installing the HDD backplane

Ê If applicable, install the HDD backplane on the 4x 3.5-inch HDD extension
box, see section
TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
"Installing the ultraslim ODD" on page
"Installing the new HDD backplane" on page
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Handling fan bridges" on page
98.
"Accessible drive covers"
90.
389.
259.
251