Ultraslim Odd In 3.5-Inch Hdd Extension Box; Installing The Ultraslim Odd In The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Accessible drives
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Reconfiguring the backup software solution" on page
12.6 Ultraslim ODD in 3.5-inch HDD extension
box
12.6.1 Installing the ultraslim ODD in the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH0 / (+) No. 0 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
444
68.
68.
82.
83.
49.
88.
Upgrade and Maintenance Manual
Hardware: 10 minutes
50.
51.
67.
117.
TX2550 M5