Adding Memory; Removing Memory Modules; Installing A Memory Module - Fujitsu FUTRO S930 Operating Manual

Adding memory

Memorymodule System expansion System expansion Removing memory Mainmemory
If you want to remove or add memory, proceed as follows:
Please observe the safety information in chapter
Only use memory expansions for notebooks: 1 GByte and 2 GByte modules
DDR3-1333 SO DIMM or DDR3-1600 SO DIMM.
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
Individual components (e.g. the processor heat sink) can become very hot
during operation. We therefore recommend that you wait one hour after
switching off the device before removing or installing the memory modules.
Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please
take note of chapter

Removing memory modules

3
1

Installing a memory module

1
Fujitsu
"Information about boards", Page
2
1
2
a
"Important notes", Page
33.
► Carefully push the two mounting
clips outwards (1).
Memory module Memory expansion
The memory module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
Memory module Memory expansion
► Carefully push the memory module
downwards until you feel it click
into place (2).
System expansions
11.
35