Channel Pages - Studer OnAir 3000 Operating Instructions Manual

OnAir 3000 Digital Mixing Console
5.3.2

Channel Pages

Channel Selection
5-12 Operation
There are three ways to open the CHAN page: Touching the Chan field in
the main menu, pressing the SEL key in the channel strip, or (the most direct
way) touching the corresponding field in the channel screen, if installed. The
CHAN page pops up and displays a short overview of the channel functions.
When using the two latter methods, the desired channel is automatically
selected.
In the lower line of the menu bar, the same menu icons are shown as in the
corresponding channel field on the channel screen; they represent the current
settings. Touching a menu icon opens the corresponding CHAN page, regard-
less whether the icon is touched on the channel screen or on the CHAN page.
The channel label is indicated in the upper right part of the page. With the
and arrow buttons on both sides of the channel label it is possible to
 
scroll the channels up and down.
Touching the channel label opens the channel list box where the desired chan-
nel can be directly selected, as shown below.
SW V6.0 Document generated: 10.10.14