Main Screen; Home Page - Studer OnAir 3000 Operating Instructions Manual

OnAir 3000 Digital Mixing Console
5.3

Main Screen

5.3.1

Home Page

Level Meter
Level Meter Label
Red Light Indicators
5-10 Operation
The left, upper, and right borders of the main screen are always visible. They
contain (clockwise):
• User stop watch
• Global fader stop watch
• Two stereo level meters, a phase correlation meter for each of them, and
a label below the level meters that indicates the current meter tap points
• Watch (real-time clock and date)
• Menu buttons
• Red light indicators, 'Frisbee' On-Air indicator symbol
• Configurable function buttons.
The central area of the main screen displays the user currently logged in as
well as the name and owner of the last loaded snapshot.
An error message window is displayed on the Home page as well in case an
internal error should occur.
Two 130-segment stereo bar graph level meters with configurable charac-
teristics and scale. The 0 dB indication automatically considers the selected
headroom (i.e., 0 dB indication = 0 dB
the selected characteristics.
Above each level meter bar graph a phase correlation meter with a –1 to +1
scale allows judging the mono compatibility of the audio signal (the more
positive the indication is, the better mono compatibility is given).
The label below each level meter bar graph indicates the current meter tap
point. Touching this label opens a configurable list of the available tap points
to select from.
The CR and ST 1-3 (control room, studio 1 to 3) indicators work in parallel
with the red light indicators on the monitoring/talkback module. An on-air
condition is indicated by changing the color of the 'Frisbee' symbol next to
the OnAir 3000 label from blue to red.
SW V6.0
– selected headroom) according to
FS
Document generated: 10.10.14