Studer OnAir 3000 Operating Instructions Manual page 74

OnAir 3000 Digital Mixing Console
Interface Indicators The three indicator fields (CAB, CMS, Router) show the current status of
the optional interfaces to the CAB (computer assisted broadcast) system such
as a Studer DigiMedia playout system, to the Call Management System, and
to an external router control system. Each of them indicates three different
statuses:
Grayed out – Interface not configured
White on black – Interface configured and active
Light red on black – Interface configured, but not active.
GUI Function Buttons The function of each of the twelve buttons at the right-hand edge of the main
screen is configurable. For each of them, a selection from a pool of various
GPIO (general-purpose inputs/outputs) and other functions (such as talkback
destination selection or level meter tap point selection, as shown left) is pos-
sible.
Example: Three of the buttons may be configured with ON-AIR, HOLD and
TELEPHONE in order to implement a telephone hybrid remote control over
the GPIOs. In such a case, touching a button generates a short output pulse
on the corresponding control output; the feedback signals from the telephone
hybrid going to the control inputs will highlight the buttons.
Operation 5-11
Document generated: 10.10.14 SW V6.0