Pro-Bel; Settings - Studer OnAir 3000 Operating Instructions Manual

6.5.31

Pro-Bel

Supported Physical Connections:
6.5.31.1

Settings

Document generated: 10.10.14
The Pro-Bel extension provides an interface to remotely set or remove audio
connections in the output routing of a controlled device. A remote device can
send messages through a serial COM port or via TCP/IP, using the 'Pro-Bel
General Switcher Communication Protocol'. This protocol provides a robust
and asynchronous method of controlling routers and is the preferred method
of communication.
Protocol Serial via RS232/422
SW-P-02
Yes
SW-P-08
Yes
On this page the 'connected' or 'disconnected' user messages can be enabled
or disabled (default setting: Off).
SW V6.0
OnAir Digital Mixing Consoles
TCP/IP via Ethernet
Not supported
Yes
Configuration 6-111
SW Version
V1.1
V2.1.6