Error Messages; System - Studer OnAir 3000 Operating Instructions Manual

5.12.4

Error Messages

5.12.4.1

System

Error Code Error Type Error Text / Comment
Error
1000
Warning
1001
Warning
1005
Error
1100
Warning
1201
Warning
1202
Warning
1401
Warning
1402
Warning
1403
Warning
1404
Warning
1405
Warning
1409
Warning
1410
Document generated: 10.10.14
SYSTEM, Fatal software error occurred - System will be stopped. For details see log-file.
Appears if a SoftError occurred. Container closes automatically.
SYSTEM, Extension ‚TalkBack.ext' could not be started. Reason: 'File 'xml\TalkBack.xml' not found'.
Appears during power-up under the following conditions:
- the extension could not find the appropriate xml-file
- the extension could not find the appropriate xdr-file
- a parser error occurs during parsing the appropriate xml-file
The affected extension will probably not work correctly.
SYSTEM, Extension 'User.ext' default settings assumed. Reason: ‚Did not find XML-File or XDR-File: xml\
User.xml'.
Default settings are:
- 20 Users
- 8 Policies
- 8 Departments
SYSTEM, ‚Desk' communication failure: Connection to ‚System40:Core' lost.
The error appears if a container loses the network connection to another container under the following
conditions:
- the remote container is in the same system
- the container depends on the remote container (proxy objects exist)
- the container itself is not a CORE (from the user point of view, a CORE does not depend on any other
container, even if there exist proxy objects)
SYSTEM, Low Memory on ‚System40:Core'.
Physical Memory available: 4.802 MB
Appears during power-up or runtime when the physical memory falls below either 5MB for all OnAir con-
tainers or 20MB for the Route6000 core.
SYSTEM, Not enough physical memory on 'System40:Core' host card. Memory upgrade required.
Appears during start-up of a container, if the host system is not equipped with the specified amount of
physical memory.
- OnAir3000 with V3.2 and higher, the CORE must be equipped with 512MB DRAM and the DESK with
256MB.
- Route6000 must be equipped with 512MB
- Route6000 with 2.2.11 or higher must be equipped with 1GB
SYSTEM, Initial Snapshot cannot be loaded. Incompatible snapshot file version 'myFirstSnap'.
Appears if an initial Snapshot file cannot be loaded because of the wrong snapshot version.
SYSTEM, Initial Snapshot file 'myFirstSnap' is corrupted!
Appears if an initial snapshot file cannot be loaded because of CRC check failure.
SYSTEM, Initial Snapshot files cannot be created. Not enough memory on the 'CORE' file system!
Appears if there is not enough memory to manually or automatically save an initial snapshot on the CF card
of the specified container.
SYSTEM, Initial Snapshot file ‚c10_initial.iss' cannot be created on the ‚CORE'. Error code 3.
Appears if an error code is returned during write operation while manually or automatically saving an initial
snapshot on the CF card of the specified container.
SYSTEM, Initial Snapshot file ‚c10_initial.iss ‚ cannot be created on the ‚CORE ‚. The folder ‹snapshots›
does not exist.
Appears if the snapshot folder does not exist while manually or automatically saving an initial snapshot on
the CF card of the specified container.
SYSTEM, Initial Snapshot cannot be loaded. Incompatible product identification in snapshot 'myFirstSnap'.
Appears during loading of the initial snapshot in case of incompatible product identification.
SYSTEM, The initial Snapshot folder 'path' does not exist. Initial Snapshots could not be loaded nor cre-
ated.
Appears during start-up if the folder does not exist.
SW V6.0
OnAir 3000 Digital Mixing Console
Operation 5-141