Configuration - Studer OnAir 3000 Operating Instructions Manual

5.8.8.3

Configuration

Document generated: 10.10.14
For correct operation, the following points must be considered:
• The assignment of logical inputs to the external router destinations is
configured under Config - LogicalInputs (configuration tool,
6.5.1).
• The facility ID of the console is entered under UserGUI - Settings (con-
figuration tool, chapter
In addition, the same facility ID must be entered in the ProBel.xml and
probel_contr_ext.ini files. A clipping of the probel_contr_
ext.ini file is given below for reference:
# session: Studio ‚PRI DESK' (Desk-A), Role: Remote Device, ProBel SW-P-08, ...
begin
session: PRI DESK
role: Remote Device
protocol: Pro-Bel 08
port: 7800
end
SW V6.0
OnAir 3000 Digital Mixing Console
6.5.38; in the example below, this is 'PRI DESK').
chapter
Operation 5-117