Studer OnAir 3000 Operating Instructions Manual page 81

Hide thumbs Also See for OnAir 3000:

Table of Contents

OnAir 3000 Digital Mixing Console

Functions for Mono Inputs

Functions for Microphone Inputs

5-18 Operation

Mono inputs have the same functionality as the stereo inputs, but without the

mono and stereo mode selectors, as shown above.

Enables/disables the phantom power for the corresponding mic input; the

button is highlighted when enabled.

Activates a 75 Hz, 12 dB/oct. high-pass (low-cut) filter only available for

microphone inputs; it is part of the analog front end. The button is highlighted

if the filter is active in the signal path.

This button appears only if an Analog Insert card is installed in the D21m

I/O frame and connected to the Mic Input card. It activates the corresponding

analog mic insert.

Document generated: 10.10.14

Chapters

Table of Contents