Studer OnAir 3000 Operating Instructions Manual page 300

CR LSP Split enable
ST1 LSP Split enable
OnAir 1500/2500:
CR / ST1 HP/LSP Split: Monitoring on left channel
OnAir 1500/2500:
C R / ST1 HP Split: Monitor Gain
OnAir 1500/2500:
CR / ST1 HP Split: PFL Gain Headphones PFL signal gain setting in split mode. Range: –89.9 to +12 dB,
OnAir 1500/2500:
CR / ST1 PFL to SP SRC
OnAir 1500/2500:
CR / ST1 Monitoring Mode
OnAir 1500:
OnAir 3000:
Document generated: 10.10.14
This mode enables the CR LSP signal to be split into left and right signal,
depending on the HP Split Mode in a similar way as for the headphone.
This mode enables the ST1 LSP signal to be split into left and right signal,
depending on the HP Split Mode in a similar way as for the headphone.
Studio 1 not supported.
Either the monitor signal is on the left HP/LSP channel, and the PFL signal
on the right one (Yes), or vice versa (No).
Studio 1 not supported.
Headphones monitor signal gain setting in split mode. Range: –89.9 to
+12 dB, or Mute.
Studio 1 not supported.
or Mute.
Studio 1 not supported.
Routes the CR or Studio 1 PFL signal to the PFL/TB speaker. Settings: Yes/
No.
Studio 1 not supported.
Selects Mode I (Normal) or Mode II (Nearfield). Mode II (Nearfield) con-
verts the CR/Studio 1 DJ headphones output to a nearfield speakers output
(refer to the block diagrams below).
Monitoring Mode II not supported.
Monitoring Mode II supported for configurations C3-C6, and only for
Compact SCore systems.
SW V6.0
OnAir Digital Mixing Consoles
Configuration 6-59