Backup / Restore - Studer OnAir 3000 Operating Instructions Manual

5.12.4.15

Backup / Restore

Error Code Error Type Error Text / Comment
Warning
8700
Warning
8701
Warning
8702
Warning
8703
Warning
8704
Warning
8711
Warning
8712
Warning
8713
Info
8714
Warning
8715
Warning
8721
Warning
8731
Warning
8740
Info
8750
Document generated: 10.10.14
BACKUP/RESTORE, Backup Failed! Mandatory configuration file not found 'config.xml'. No backup cre-
ated.
Appears during backup operation if a mandatory configuration cannot be found.
BACKUP/RESTORE, Backup Failed! Not enough memory to store backup files. No backup created.
Appears during backup operation if there is not enough memory on the target storage to save all backup
files.
In case where the backup was initiated on an OnAir console, the external storage media is full.
BACKUP/RESTORE, Backup Failed! Configuration file ‚config.xml ‚ cannot be stored. 'Error Text'. No
backup created.
Appears during backup operation if the specified file cannot be written to the specified backup location due
to missing access privilege.
BACKUP/RESTORE, Backup Failed! File transfer from 'CORE' interrupted. No backup created.
Appears during backup operation if the file transfer from any source container to the backup target con-
tainer was interrupted by any reason, e.g. container shut down or network interruption.
BACKUP/RESTORE, Backup Failed! Could not create Backup Directory 'DirName'. No backup created.
Appears during backup operation if the backup folder could not be created.
BACKUP/RESTORE, Restore Failed! Not enough memory on the 'CORE' file system. Restore aborted.
Appears during restore operation if there is not enough memory to restore backup files to the CF card of
the specified container.
BACKUP/RESTORE, Restore Failed! Configuration file ‚config.xml ‚ cannot be restored to ‚CORE'. 'Error
Text'. Restore aborted.
Appears during restore operation if the specified file cannot be written to CF card of the specified target
container due to one of the following reasons:
- target folder is missing
- access to target folder or file denied
BACKUP/RESTORE, Restore Failed! File transfer to ‚CORE' interrupted. Restore aborted.
Appears during restore operation if the file transfer from the backup source container to any target con-
tainer was interrupted by any reason, e.g. container shut down or network interruption.
BACKUP/RESTORE, Missing configuration file! Mandatory configuration file ‚config.xml ‚ not found. File not
restored to ‹CORE›.
Appears during restore operation if the specified mandatory configuration file cannot be found at the speci-
fied backup location. The restore operation will continue.
BACKUP/RESTORE, Restore Failed! Trying to restore a backup to the wrong type of Core. Restore
aborted.
Appears during restore operation, if the user tries to restore a CSCore backup to a SCoreLive system or
vice versa.
BACKUP/RESTORE, Rename Backup Failed! Backup 'xyz' not renamed.
Appears during rename operation if access to the backup-folder is denied.
BACKUP/RESTORE, Delete Backup Failed! Backup 'xyz' not deleted.
Appears during delete operation if access to the backup-folder or any file within the backup is denied.
BACKUP/RESTORE, Reboot is not possible, since there is at least one channel on-air. Please make sure
no channel is on-air and try again.
Appears during reboot operation if at least one channel is on-air.
BACKUP/RESTORE, Please restart core and desk(s) to complete the restore operation.
Appears, after restore operation, of no AutoReboot file exists (manual reboot).
SW V6.0
OnAir 3000 Digital Mixing Console
Operation 5-155