Assignable Channel Strip Functions - Studer OnAir 3000 Operating Instructions Manual

OnAir Digital Mixing Consoles
Function
CentralRotary1IncDec
CentralRotary2IncDec
CentralRotary3IncDec
CentralRotary4IncDec
CentralRotaryStart
CentralRotaryStop
6.5.37.5

Assignable Channel Strip functions

Two LEDs per Key (red/yellow) • on all fader modules
One LED per Key (yellow) • on rotary and rotary assign modules (OnAir 3000)
Function
Channel On/Off functions
Channel_Mute
Channel_Off
Channel_Off_Yellow
Channel_On
Channel_On/Off
Channel_On/Off_Both
Channel_On/Off_CMS
Channel_On/Off_Yellow
Channel_On_CMS
PFL & TalkBack functions
PFL_LocMomentary
PFL_On/Off
PFL_On/Off_momentary
PFL_TBMomentaryfromSrc1-4
TBfromSrc1
TBfromSrc2-4
6-134 Configuration
Assignable to:
Rel.
in
SW
V3.0
V3.0
V3.0
V3.0
V3.0 ●
V3.0 ●
Channel strip functions are related to a channel strip. They normally refer to
the input or bus currently routed to this channel strip and allow assigning a
function to a desk element in the Desk_KeyMapping.xml file. Please
note that the color of the key illumination is depending on the module type
(one or two LEDs per key).
• on the editor module (OnAir 3000)
• on fader assign modules (OnAir 3000)
• on monitoring modules
• on the XL module
• on the central module (OnAir 2500)
Assignable to:
Rel. Module with Module with
in 2 LEDs per key 1 LED per key
SW (red & yellow)
V1.0 red
V1.0 -
V6.0 yellow
V1.0 red
V1.0 red
V2.0 orange
red/orange/
V2.1
yellow
V2.0 yellow
red/orange/
V2.1
yellow
V2.0 yellow/ orange
V1.0 yellow/ orange
V2.0 yellow/ orange
red/orange/
V2.0
yellow
V1.0 red
V1.0 red
SW V6.0
Details
●
●
●
●
start button of the stop watch, function without LED
stop button of the stop watch, function without LED
Details
(yellow)
yellow Inverse function of Channel_On/Off
-
-
yellow
yellow
yellow
yellow
-
yellow
if BroadcastPFL mode is set to 1 it lights orange while
-
the PFL signal is cut
if BroadcastPFL mode is set to 1 it lights orange while
-
the PFL signal is cut
if BroadcastPFL mode is set to 1 it lights orange while
-
the PFL signal is cut
two LEDs: red (TALK), yellow (PFL), orange
-
(TALK&PFL active)
yellow common used TB function for CR, ST1-3
yellow TB source 2-4 only for ST1-3 available
Document generated: 10.10.14