Studer OnAir 3000 Operating Instructions Manual page 256

Livewire Inputs
Input Stream 1
Input Stream 8
Document generated: 10.10.14
The physical input mapping of Livewire inputs to LogicalInputs differs from
that of all other consumers (PatchInputs, Returns, Extern PFL- and Moni-
toring Sources, etc.), in order to make sure the following mapping rules are
applied:
• A LogicalInput is always mapped to the left- and right channel of a Listener.
This avoids conflicts for the label transfer.
• A Listener is only consumed from one LogicalInput.This avoids conflicts
during operation (Strip Lock, OnAir restriction, etc..).
Input Stream Patching
Listener 1
Listener 8
For the first source of LogicalInputs, Listeners of Livewire I/O cards appear
in a dedicated group called Livewire. A Livewire Listener is always a logical
source with stereo format.
When selecting the Livewire group, all available Livewire Listeners, which
are not yet assigned to a LogicalInput appear for selection.
Note : A Livewire Listener can only be assigned to a LogicalInput once.
SW V6.0
Physical Input Mapping
LVDS In 1
LVDS In 2
LVDS In 15
LVDS In 16
OnAir Digital Mixing Consoles
FRouter51Src.FirstSource
FRouter51Src.SecondSource
Configuration 6-15
LogicalInput A