Studer OnAir 3000 Operating Instructions Manual page 112

MPX Master Volume
Select Group
Assign / Clear
Document generated: 10.10.14
MPX ON Switches the conference on/off.
Controls the listening level of the MPX master bus.
Note: MPX conferences can be setup very conveniently on the desk surface as well;
refer to chapter
This page allows selecting or deselecting MPX conference members from all
available inputs.
First, touch the Select Group field. A list of all available input groups pops
up for selection, such as MIC, LINE, or TEL (as shown above). The leftmost
rotary knob is used for selection.
To assign an input to the MPX conference, touch Assign; to de-assign, touch
Clear.
Clear All to delete all assigned conference members of the current group at once.
The conference can be switched on/off, and the MPX master bus level can
be adjusted on this page as well.
SW V6.0
OnAir 3000 Digital Mixing Console
5.5.5.
Operation 5-49