Studer OnAir 3000 Operating Instructions Manual page 207

OnAir 3000 Digital Mixing Console
Error Code Error Type Error Text / Comment (SCL: SCore Live; CSC: Compact SCore)
Info
2202
Error
2400
Error
2403
Error
2404
Error
2405
Info
2406
5-144 Operation
CORE DRIVER, DSP card in slot 1 detected. Please make sure, the CORE is rebooted in order to achieve
system consistency.
Appears during runtime (not during power-up) when the user inserts a DSP card in a slot that was empty at
power-up.
CORE DRIVER, No communication to CORE.
Appears during power-up if the Bridge card does not respond to eGetCore or if it responds with eGetCor-
eFailure.
CORE DRIVER, DSP Card in slot 1 failed! Card has been reset.
Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of
the DSPs) but the functionality can be re-established by resetting the card (the Bridge Card tries to reset a
DSP Card up to 3 times). (eFailedIoDspCardResetted)
CORE DRIVER, DSP Card in slot 1 failed! Code reloaded to redundant card in slot 6. Connect HD Link
cables of DSP slot 1 to DSP slot 6!
Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of
the DSPs) after a DSP card was previously reset once. The tasks will be migrated to a redundant DSP card
that was not reset before. (eFailedIoDspCardLoadedTo)
CORE DRIVER, Communication to CORE lost.
Appears during runtime if no 'heartbeat' has been received from the Bridge Card for more than 5 seconds.
CORE DRIVER, Bridge Card firmware was downloaded. This will take effect after next restart of Core.
Appears during runtime if the Bridge Card firmware was downloaded.
SW V6.0 Document generated: 10.10.14