Studer OnAir 3000 Operating Instructions Manual page 273

Hide thumbs Also See for OnAir 3000:
Table of Contents

Advertisement

OnAir Digital Mixing Consoles
British Standard Peak Audio Level
British Standard M/S Mode  Level reduction of the M meter can be selected from either –3 dB or –6 dB
ChannelOn follows FaderOpen
VCA ChannelOn Control, VCA Channel PFL Control
OnAir 1500/2500:
Generator off for on-air channels
Reset Timer On Fader Close
Channel TB
5.1 to Stereo Mixdown... 
Surround Level
Center Level
OnAir 1500/2500:
Mono Mode Selects (L+R) –3 dB (M3 mode) or (L+R) –6 dB (M6 mode) for mono mixes
6-32  Configuration
Can be selected in steps of 1 dB within a range of –48 to 0 dB
–10 dB
.
FS
(default value: –3 dB).
If active, this function automatically switches a channel ON while its fader
is open. Selections: On or Off, default value: Off.
These settings are used to activate the ON and PFL functions for VCA mem-
bers (usually, only the VCA master fader effects the VCA members). Only
available if the VCA option is licensed and activated. Selections: On or Off,
default value: Off.
Not supported.
If set to On, this function disables the GEN button on the channel pages for
all channels currently being on-air; default value: Off.
If set to On, cumulative time measurement is selected for the input fader
stopwatches; a running stopwatch is stopped by switching the channel OFF; it
is reset only when the fader is closed; default value: Off. Also refer to
5.9.
Selections: Nothing, or TB Off on Channel Active, default value: Nothing.
If TB Off on Channel Active is selected, talkback to a channel currently
being active is inhibited.
Sets the contribution level of surround and center channels for the internal
stereo downmix, as well as the overall level.
Adjustable in steps of 1 dB between 0 and –10 dB; default setting: –3 dB.
Adjustable in steps of 1 dB between 0 and –10 dB; default setting: –3 dB.
Trim Level
Adjustable in steps of 1 dB between 0 and –10 dB; default setting: 0 dB.
5.1-channel outputs not supported.
of stereo sources.
SW V6.0
(default value:
FS
chapter
Document generated: 10.10.14

Advertisement

Table of Contents
loading

Table of Contents