Studer OnAir 3000 Operating Instructions Manual page 320

GPI Function
Cough
1: CR / *ST1 / ST2 / *ST3 / CompactMonTBs
LS_CUT
LS_DIM
1: TB Source: CR / *ST1 / ST2 / *ST3 / Ext.
TalkBack
EnableTalkback
* OnAir 3000 only
GPI Function
CR Source Selector
* ST1 Source Selector
ST2 Source Selector
* ST3 Source Selector
CompMonTB Source
2: Monitor sources, Follow CR/*ST1/ST2/*ST3
Selector
Cue Source Selector
2: Monitor sources, Follow CR/*ST1/ST2/*ST3
1: Primary Desk/*Secondary Desk/Not Spec.
Snapshot
Next In
MicGroupKey
FadeIn
FadeOut
OutputRoutingIn
* LSP Mode On
Red Light
ResetChannel
* OnAir 3000 only
Document generated: 10.10.14
Momentary and Latching User Requests
UserKey and User ON/OFF Requests.
Arguments
1: Logical Input
2: User / Machine
1: CR / *ST1 / ST2 / *ST3
2: User / Machine
2: Destination: All TB destinations
1: Destination: All TB destinations
Event-Driven Actions
The following GPInput functions are activated if the Input Logic sets the
InputLevel.
Arguments
1: Monitor sources, Follow *ST1/ST2/*ST3
1: Monitor sources, Follow CR/ST2/ST3
1: Monitor sources, Follow CR/*ST1/*ST3
1: Monitor sources, Follow CR/ST1/ST2
1: Compact Monitor/TB unit
1: Cue CR / *Cue ST1
2: All/CR/*ST1/ST2/*ST3
3: string
1: StartNextA/B_Request
1: MicGroup1...12
1: Logical Input / Master
1: Logical Input / Master
1: Partial Output Routing 1...24 /
2: Ignore Enable Key / Desk Group1...8
1: CR / *ST1 / ST2 / *ST3
2: Dim / Cut / Nothing / CutAllowTB
1: Reset All / DeEs / EQ / Dynamics
2: Logical Input / Strip Channel / SubGroup
SW V6.0
OnAir Digital Mixing Consoles
Description
Cough key, for mic and line inputs; input is muted, but no
change in signaling. Controls all logical inputs using the
same physical mic input; 'time' must not be set to >0
Monitor speakers CUT
Monitor speakers DIM
Talkback from Source to Destination (Source = Destination
not allowed for SW up to V3.1)
Enables specified talkback destination
Description
CR monitor source selector
Studio 1 monitor source selector
Studio 2 monitor source selector
Studio 3 monitor source selector
Compact monitor/TB unit monitor source selector
Cue monitor source selector
Recall the global snapshot with the name specified by 'String'
for the given location
Start key
Mic Group On Request key according to specified ext. Mic
Box key is on
Starts the fade-in ramp of the specified LogicalInput or of the
LogicalInput of the specified StripChannel, respectively.
Starts the fade-out ramp of the specified LogicalInput or of
the LogicalInput of the specified StripChannel, respectively.
Recall of Output Routing Snapshot with the name specified
by 'String'.
Argument 2 is either undefined (for downward compatibility), Ignor-
eEnableKey, or a valid desk group 1...8.
All partial output routings with the option UseEnableKey set to 'true'
need Argument 2.
If Argument 2 is IgnoreEnableKey partial output routings are loaded
unconditionally.
If Argument 2 is DeskGroup1...8, partial output routings check on
loading the enable status of the corresponding desk group.
If Argument 2 is not defined, the snapshot is not loaded!
Partial output routings with the option UseEnableKey set to 'false'
are loaded unconditionally and do not need Argument 2.
Set loudspeaker dim/cut mode if 'Red Light' is ON
Reset Deesser/EQ/Dynamics or all parameters of the selected
channel or group
Configuration 6-79