Studer OnAir 3000 Operating Instructions Manual page 58

StripAssign
operation
change
timeout
exit exit
ONAIR
exit
back to group selector
back to stream
group selector
level down
Level 1: Strip State
Document generated: 10.10.14
Normal
touch
long press
activate selector
exit
GroupSelect
short press
long press
if input group
InputSelect
short press
select input
long press
back to input
selector
if AoIP input and not ONAIR
StreamGroupSelect
short press
long press
change to stream
selector
StreamSelect
level up / exit
'Normal' / 'Locked'
Due to the on-air restrictions, the Input Selector doesn't provide neither any
Input Selection nor Stream Patching if the corresponding Strip Channel is
locked. The Input Selector will be closed immediately when the selected Strip
Channel gets locked.
The Input Selector will be activated by touching the assigned rotary and
changes to the Input Group Selector.
SW V6.0
lock
set to locked
unlock
set to normal
exit
if „Sources"
if not AoIP input
or ONAIR
short press short press
clear stream clear stream
short press short press
select stream select stream
lock / unlock
OnAir 3000 Digital Mixing Console
Locked
long press
back to group
selector
StreamGroupSelect
short press
long press
change to stream
back to stream
selector
group selector
StreamSelect
Operating Elements 4-15
lock
set to locked