Core Driver (Onair 3000 With Scorelive Only) - Studer OnAir 3000 Operating Instructions Manual

Hide thumbs Also See for OnAir 3000:

Table of Contents

OnAir Digital Mixing Consoles

Core Driver (OnAir 3000 with SCoreLive only)

Combine Mode

6-44  Configuration

With SW V6.0 the CoreDriver function group has been introduced. Under

DSPCards, the automatically detected DSP cards are displayed. If ALink

DSP cards are used, the mode of ALink1 and ALink2 can be defined as well

as the redundancy behaviour between main and redundant ALink ports.

Activates the Combine Mode for ports ALink1 and ALink2.

Combine Mode = On :

all 192 I/O channels from port ALink1 are used (port ALink2 remains unused).

Combine Mode = Off :

96 I/O channels from port ALink1 and 96 I/O channels from port ALink2 are

used at the same time.

Document generated: 10.10.14

Table of Contents