OnAir 3000 Digital Mixing Console
7.4.2
Channel screen
7.4.3
Desk Resource Definition
7.4.4
Logical inputs
7-10 A/B Desk Configuration
container.ini
Configure the ContainerIDs of the ChannelScreens as follows:
• 110... for the primary desk
• 160... for the secondary desk
The ChannelScreen will also consider the StripChannel/DeskResource Defi-
nition (e.g. a ChannelScreen with ID# 160 indicates the first six StripChan-
nels of the secondary desk).
Configuration Tool: User GUI Primary Desk → Desk Resources
Configuration Tool: User GUI Secondary Desk → Desk Resources
The SCore resources have to be assigned either to the primary or the second-
ary desk, according to AB DESK Mode Desk Resources.xls.
Please note that:
• StripChannel,
• Monitoring CR/ST1 and ST2/ST3, and
• InputGroup
must match the XML configuration of the desks, as described in
Note:
It may be helpful to set the Label of the first LogicalInput and the first
LogicalOutput of the secondary desk before defining the Desk Resources
'LogicalInput' and 'LogicalOutput'.
Configuration Tool: Config → LogicalInputs
The following parameters have to be configured according to AB DESK
Mode IO Config.xls:
• Alias
• Label
• Location
• First/Second Router Source
Note:
If a mic input is shared between the primary and the secondary desk, both
LogicalInputs must have the same Location.
SW V6.0
chapter
7.4.1.
Document generated: 10.10.14