Studer OnAir 3000 Operating Instructions Manual page 206

Error Code Error Type Error Text / Comment (SCL: SCore Live; CSC: Compact SCore)
Error
2000
Error
2001
Error
2002
Error
2003
Error
2004
Error
2005
Error
2050
Error
2051
Error
2052
Error
2100
Error
2101
Warning
2200
Info
2201
Document generated: 10.10.14
CORE DRIVER, DSP card failure. DSP card in slot 1 missing.
SCL: Appears during power-up if a card is missing which is expected in a certain physical slot by the cur-
rently running DSP configuration, or during runtime if a DSP Card was removed. (SCL:eCardMissing)
CSC: In case of the Compact Score, the error appears also during runtime if a DSP card is removed with-
out deactivation.
CORE DRIVER, DSP card failure. Firmware download to DSP card in slot 1 failed. File 'sh4.hex' not found.
Appears at power-up and during runtime if during DSP firmware download (SH4 and/or Sharc) a file cannot
be found.
CORE DRIVER, DSP card failure. Firmware download to DSP card in slot 1 failed. Write error.
Appears at power-up and during runtime if during DSP firmware download (SH4 and/or Sharc) a write error
occurs.
CORE DRIVER, DSP card failure. No communication with DSP card in slot 1. Card is not alive.
SCL: Appears during power-up and runtime if a DSP card fails (the watchdog of the VDCA detects a failure
of one of the DSPs) after the third try to be reset. (SCL: eCardFail, eError).
CSC: Appears during power-up and runtime if a DSP card fails (the watchdog of the VDCA detects a failure
of one of the DSPs).
CORE DRIVER, DSP card failure. No communication with DSP card in slot 1. SH4 is not ready to receive
parameters.
Appears at power-up and during runtime if the SH4 does not provide a valid parameter address within 100
ms
CORE DRIVER, DSP card failure. Initialization error of DSP card in slot 1. 'Reason'.
Appears at power-up and during runtime if during initialisation of the DSP card one of the following initiali-
sation errors occur:
• Restart timeout
• Download timeout (e.g. VDCA not working)
(If one DSP is not working: at power-up WinContainer hangs, at card insert WinContainer is extremely
slow -> Connection to core lost)
• GetVersion timeout
CORE DRIVER, Failure of DSP card in slot 1. The card is uninitialized.
CORE DRIVER, Failure of DSP card in slot 1. The card has a SH4 error.
Appears at power-up and at card insertion if SH4 does not boot successfully (e.g. when the EPROM is
missing [WinCE does not boot at power-up])
CORE DRIVER, Failure of DSP card in slot 1. The PCI memory is not visible
Appears when the SH4 is reset or when a card is inserted into a slot where no card was inserted at start-up
time.
CORE DRIVER, Configuration mismatch. The DSP cards provide only 18 audio channels for the 24 chan-
nel console.
Appears at power-up if the number of StripChannels does not match the configuration of the dsp.ini task
definition.
CORE DRIVER, Cannot load PCI Driver. File 'PCICE.dll' not found.
Appears in the init phase during power-up if the PCI.dll file is not found. The CoreDriver sends a soft warn-
ing during the init phase. Since the DSP extension is required, but cannot be started, the CORE container
will not start (Soft Error during init phase).
CORE DRIVER, DSP card in slot 1 deactivated.
Appears during runtime (not during power-up) when a DSP card is de-activated by the user or due to a
DSP card failure.
CORE DRIVER, DSP card in slot 1 detected.
CSC: Appears during runtime (not during power-up) when the user inserts or activates a DSP card.
SCL: (1) Appears during runtime when the user inserts a DSP card or after a DSP card has been success-
fully reset.
(2) Appears during power-up of the SCoreLive if the core host software is still running (external Windows
PC, not possible on local host card).
SW V6.0
OnAir 3000 Digital Mixing Console
Operation 5-143