System Information - Studer OnAir 3000 Operating Instructions Manual

User Login
5.13.5.7

System information

Document generated: 10.10.14
leave the password entry empty, such as shown below.
When this is done, save the file on the user's USB stick under the name
Login.ID.
Each time the user's USB stick is plugged into the console's USB socket, the
user is automatically logged in/out. After logging in, the user's name and his
last loaded snapshot are displayed on the Home page. If a default snapshot
was saved for this user, it is automatically loaded to the desk as well.
When logging out (i.e. pulling out the login USB stick), the system automati-
cally activates the default user but will keep the last loaded snapshot.
System Information allows to collect configuration and runtime information
of a system.
SW V6.0
OnAir 3000 Digital Mixing Console
Operation 5-177