standby console enable
standby console enable
To enable access to the standby console switch, use the standby console enable command in redundancy
main configuration submode. To disable access to the standby console switch, use the no form of this command.
standby console enable
no standby console enable
Syntax Description
This command has no arguments or keywords.
Command Default
Access to the standby console switch is disabled.
Command Modes
Redundancy main configuration submode
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
This command is used to collect and review specific data about the standby console. The command is useful
primarily for Cisco technical support representatives troubleshooting the switch.
Examples
This example shows how to enter the redundancy main configuration submode and enable access to the standby
console switch:
Controller(config)# redundancy
Controller(config-red)# main-cpu
Controller(config-r-mc)# standby console enable
Controller(config-r-mc)#
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
34
Modification
This command was introduced.
High Availability Commands
OL-32317-01