Sntp Broadcast Client Poll Interval - Cisco Small Business 200 Series User Manual

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
sntp
authentication-
key

sntp broadcast client poll interval

If the switch is configured as an SNTP broadcast client, it polls the SNTP
broadcast servers to synchronize time settings at a specified interval. Use this
command to set the poll interval. Use the no form of the command to reset it to the
default value.
sntp broadcast client poll-interval poll-interval
no sntp broadcast client poll-interval
Syntax Descriptions
Parameter
poll-interval
Default
poll-interval—3
Command Modes
Global Config
Related Commands
Command
sntp client mode
show sntp
Description
Defines an SNTP authentication key.
Description
A value from 3 to 16. This value is used as an exponent of 2
to calculate the poll interval in seconds.
Description
Enables Simple SNTP client mode and sets the mode to
either broadcast or unicast.
Displays SNTP settings and status.
2
107