Show Mac-Address-Table Multicast - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
set multicast
forward-all
set multicast
filter-
unregistered
show multicast
filtering

show mac-address-table multicast

Use this command to display static multicast filtering configuration.
show mac-address-table multicast {macaddr}
Command Modes
Privileged Exec
Examples
The following command displays information on all static multicast filters.
(Switch) #show mac-address-table multicast
MAC Address
ce
-----------------------
--
00:01:01:00:5E:01:02:03
00:01:33:33:00:00:00:03
Related Commands
Command
macfilter
Description
Enables forwarding of all multicast packets on a port in a
VLAN.
Drops unregistered-multicast-addresses on a port in a
VLAN.
Displays the multicast filtering mode configuration on the
switch.
Source Type
------ -------
IGMP Dynamic
MLD Dynamic
Description
Adds a static filter entry with MAC-layer station source
address or IP Group Address.
Description Interface
-------------- ---------
Network Assist Fwd:
e24
Network Assist Fwd:
e24
7
Fwd
Interfa
-------
Fwd:
e24
Fwd:
e24
299