Show Running-Config - Dell Networking 2024 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the active system image file that the device
loads at startup.
console(config)#show bootvar
Image Descriptions
active :
backup :
Images currently available on Flash
unit active
----- ------------ ------------ ----------------- -----------------
1 6.0.0.0

show running-config

Use the show running-config command in Privileged EXEC mode to display
the contents of the currently running configuration file, including banner
configuration. The command only displays the configurations that are non-
default.
NOTE:
All non-default configurations for the Captve Portal branding images and
encoded Unicode are not displayed via the standard show running-config
command. If desired, you can view this data in the script files or by using the all
mode for the show running-config command. In addition, please note that this non-
readable data is contained and displayed at the end of the script files.
1472
Configuration and Image File Commands
backup current-active
9.25.16.57 6.0.0.0
next-active
6.0.0.0