Avaya DEFINITY Server CSI Maintenance Manual page 1210

get boot-image 1C07
Image 1
Board Type: TN2501
FW Vintage: 02
HW Signature: 02
Suffix: A
Date: 03/02/02
Timestamp: 10:30:50
CRC Checksum: Good
Active Image: Yes
Reboot Image: Yes
Screen 84. Display Firmware Image(s) screen
Check the date and time stamps to determine whether to revert back to
Image 1 or Image 2. In the example that follows, we are reverting back to
Image 2, because it has the older date and time stamp.
Check the Active Image field to see if Image 1 or Image 2 is active on the
board.
2. At the SAT type set boot-image board <UUCSS> image <1 | 2> and
press
Example: set boot-image board 1C07 image 2
The system responds with Command Successfully Completed.
3. At the SAT type get boot-image <UUCSS> and press
status of the firmware images on the target circuit pack.
The Display Firmware Image(s) report
1210
Issue 5 October 2002
DISPLAY FIRMWARE IMAGE(S)
Image 2
TN2501
01
02
A
03/02/01
12:42:18
Good
No
No
.
Enter
NOTE:
In most cases the image with the more recent date and time stamp is
the new firmware image file.
RETURN
(Screen 85) appears.
to check the
555-233-119