Dell PowerConnect 8024 Cli Reference Manual page 49

Table 1-1. System Command Groups
Command Group
Layer 3 Commands
ARP (IPv4)
DHCP and BOOTP Relay
(IPv4)
DHCPv6
DVMRP (Mcast)
IGMP (Mcast)
IGMP Proxy (Mcast)
IP Helper
IP Routing (IPv4)
IPv6 Multicast
IPv6 Routing
Loopback Interface (IPv6)
Multicast (Mcast)
OSPF (IPv4)_
OSPFv3 (IPv6)
PIM-DM (Mcast)
PIM-SM (Mcast)
Router Discovery Protocol
(IPv4)
Routing Information Protocol
(IPv4)
Tunnel Interface (IPv6)
Virtual Router Redundancy
(IPv4)
Utility Commands
Auto Config
Captive Portal
Clock
Configuration and Image Files Manages the switch configuration files.
Denial of Service
(continued)
Description
Manages Address Resolution Protocol functions.
Manages DHCP/BOOTP operations on the system.
Configures IPv6 DHCP functions.
Configures DVMRP operations.
Configures IGMP operations.
Manages IGMP Proxy on the system.
Configures relay of UDP packets.
Configures IP routing and addressing.
Manages IPv6 Multicasting on the system.
Configures IPv6 routing and addressing.
Manages Loopback configurations.
Manages Multicasting on the system.
Manages shortest path operations.
Manages IPv6 shortest path operations.
Configures PIM-DM operations.
Configures PIM-SM operations.
Manages router discovery operations.
Configures RIP activities.
Managing tunneling operations.
Manages router redundancy on the system.
Automatically configures switch when a configuration file is not found.
Blocks clients from accessing network until user verification is
established.
Configures the system clock.
Provides several Denial of Service options.
49
Command Groups