Dell PowerConnect M6348 Cli Reference Manual page 288

Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
The value of this parameter should be larger than the IGMP Snooping Max Response Time.
Example
The following example sets the query interval to 1800:
console(config)#ip igmp snooping querier query_interval 1800
ip igmp snooping querier timer expiry
This command sets the IGMP Querier timer expiration period which is the time period that the
switch remains in Non-Querier mode after it has discovered that there is a Multicast Querier in
the network. The no form of this command sets the IGMP Querier timer expiration period to its
default value.
Syntax
ip igmp snooping querier timer expiry
no ip igmp snooping querier timer expiry
seconds — The time in seconds that the switch remains in Non-Querier mode after it has
•
discovered that there is a multicast querier in the network. The range is 60–300 seconds.
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the querier timer expiry time to 100 seconds.
console(config)#ip igmp snooping querier timer expiry 100
288
seconds