Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the following alarm conditions:
•
Alarm index — 1
•
Variable identifier — 1.3.6.1.2.1.2.2.1.10.5
•
Sample interval — 10 seconds
•
Rising threshold — 500000
•
Falling threshold — 10
•
Rising threshold event index — 1
•
Falling threshold event index — 1
console(config)#rmon alarm 1 1.3.6.1.2.1.2.2.1.1.10.5 10 50000 10 1 1
rmon collection history
Use the rmon collection history command in Interface Configuration mode to enable a Remote
Monitoring (RMON) MIB history statistics group on an interface. To remove a specified RMON
history statistics group, use the no form of this command. Also see the show rmon collection
history command.
Syntax
rmon collection history
no rmon collection history
index — The requested statistics index group. (Range: 1–65535)
•
ownername — Records the RMON statistics group owner name. If unspecified, the
•
owner
name is an empty string.
bucket-number — A value associated with the number of buckets specified for the
•
buckets
RMON collection history group of statistics. If unspecified, defaults to 50. (Range: 1 - 65535)
interval
seconds — The number of seconds in each polling cycle. If unspecified, defaults to
•
1800. (Range: 1–3600)
index
ownername
[owner
index
bucket-number
] [buckets
seconds
] [interval
]
993